Is impeller the key to the working efficiency of Maglev blower? For a maglev blower, the impeller is also a very important component. It also provides an efficient working environment for the blower. The size, shape, performance, quality and other factors of the impeller will have a very direct impact on the quality, performance and service life of the maglev blower......
Time:2018-11-17 Clicks:1972
Magnetic suspension blower, also known as magnetic suspension single-stage high-speed centrifugal blower, is mainly used to aerate the water to improve the oxygen content in the water, so as to remove iron, manganese or promote the degradation of organic matter by aerobic microorganisms, so as to remove the substances that can be oxidized and precipitated. In addition, aeration can make the water and air fully contact to exchange gaseous substances to remove volatile substances in the water, such as water......
Time:2018-11-7 Clicks:1953
What is magnetic levitation blower and what are its advantages? 1. What is magnetic levitation blower? Magnetic levitation blower is a kind of turbine equipment using magnetic levitation bearing. Its structure is that the blower impeller is directly installed on the extension end of the click shaft, and the rotor is vertically suspended on the active magnetic bearing controller. Direct drive by high-speed motor can be realized without speed reducer and coupling......
Time:2018-11-27 Clicks:2074
As a single equipment often used in sewage treatment, the fan can be said to be a big fan. In the market, there are many kinds of fans, including magnetic suspension blower, air suspension blower, roots blower, centrifugal blower, etc. What's the difference between so many fans? On the project, how to apply the appropriate Z? Next, Tianrui heavy industry will bring you magnetic levitation high-end technical equipment and blower......
Time:2019-6-15 Clicks:1894
Shanghai Maglev special line is the world's first maglev commercial line jointly developed by China and Germany. The first shovel was dug in Pudong on March 1, 2001, and the whole line was put into trial operation on December 31, 2002. The commercial operation was officially started on January 4, 2003. It has been 15 years since then.......
Time:2018-11-7 Clicks:1920
With the integration of electronic components and the development of control theory and rotor dynamics, great progress has been made in the research of Maglev blower shaft technology at home and abroad. However, whether in theory or in the process of commercialization, this technology has many problems......
Time:2019-5-24 Clicks:1938
At present, among many industrial wastewater treatment technologies and processes, the activated sludge process is still the wastewater treatment technology that is widely used, mature in technology and low in operating cost. In the activated sludge treatment process section, the key core equipment of Z is the blower. In the municipal sewage activated sludge treatment process, the difference between the air volume of the blower and the amount (volume) of sewage treated......
Time:2018-11-7 Clicks:1785
Comparison of magnetic suspension centrifugal blower with gear speed increasing and air suspension blower: gear speed increasing blower - General Motor (50Hz) plus gear increases the speed of impeller- Use inletguidvane (IGV) or diffuservane to adjust the flow......
Time:2018-11-7 Clicks:1764
Industrial wastewater has the characteristics of large discharge, wide pollution range and complex discharge mode; There are many kinds of pollutants and the concentration fluctuates greatly......
Time:2018-11-7 Clicks:1758
The magnetic levitation blower developed and produced by Shandong Tianrui heavy industry adopts advanced magnetic levitation bearing, three-dimensional flow turbine, high-speed permanent magnet synchronous motorn......
Time:2019-6-17 Clicks:1750
A municipal sewage treatment plant was built in 2006 and put into operation in January 2007. In 2010, the total expansion scale reached 60000 tons, and the actual treatment capacity was 55000-60000 tons. A2O process is adopted, and roots blower is originally adopted, with single unit air volume of 58m ³/ Min, boosting 70kpa, power 132kw, dual use and two standby, high power consumption, noise......
Time:2019-3-22 Clicks:1913
Magnetic levitation blower is a kind of turbine equipment with magnetic levitation bearing. The main structure is that the blower impeller is directly installed on the extended end of the motor shaft, and the rotor is vertically suspended on the active magnetic bearing. .....
Time:2018-11-7 Clicks:1834
Magnetic levitation blower adopts advanced magnetic levitation bearing, three-dimensional flow impeller, high-speed permanent magnet synchronous motor, high-speed variable frequency speed regulation, intelligent monitoring and control and other core technologies......
Time:2019-6-26 Clicks:1765
The magnetic levitation centrifugal blower independently developed and manufactured by Shandong Tianrui heavy industry has a wide range of applications in different industries, and has obvious economic and social benefits. It is the leader in the magnetic levitation industry in the valley. The following is a brief introduction to the different models and other parameters of the Tianrui magnetic levitation blower. Model product specification flow (M ³/ Min) pressure (kPa) motor power [HP...
Time:2019-6-6 Clicks:1772
